Central oxygen supply

The main features

1. Oxygen station mode of oxygen can choose medical oxygen generator, oxygen tanks and bus-bar oxygen to one of three ways or two of these combinations.

2. The oxygen bus-bar system set up under-voltage acousto-optic alarm device, and can be automatically or manually switch with oxygen.

3. Oxygen regulator box adopts double road design, to ensure the continuity of the oxygen to the ward.

4. Each ward nurse station set up a ward monitoring meter, automatic monitoring the medical ward for oxygen pressure and oxygen, for hospital cost accounting provides a reliable basis.

5. Oxygen tube road all adopt after degreasing process of oxygen free copper tube or stainless steel tube, and all the special connection accessories adopt oxygen articles.

The main purpose

Centralized oxygen supply system is to concentrate the oxygen gas source, gas source of the high pressure oxygen after decompression, through pipes to each gas terminal, has rapidly in each gas terminal plug seal socket, plug in gas equipment (oxygen wet machine, breathing machine, etc.) you can supply.

The working principle of

Centralized oxygen supply system is mainly used in hospital wards, er, observation, and the operating room the place such as oxygen supply.

Oxygen supply system

(1) oxygen (bus), oxygen source parts: according to the design, oxygen source of bus-bar using 2, 3, 4, 5 bottle into a set of two groups, one group with a set of spare, bottle have cut-off valve, when a group of cylinder pressure is below the prescribed scope audible and visual alarm automatically. Through the oxygen decompression to 0.2 ~ 0.4 MPa (adjustable) after the oxygen pipeline after ward to ward terminals, finally by wet process on oxygen flow regulation switch again after decompression for patients.

(2), the nurse station alarm box device: when the sent to the building of the oxygen pressure rise or fall beyond the specified value, the alarm box also send out sound and light alarm signal, remind relevant personnel in a timely manner.

(3), oxygen pipeline: oxygen pipeline connection oxygen source and the terminal, the condole top of oxygen pipeline in various locations, installed in the main tube Wells installed in the independent. Piping layout should avoid pillars, main line via gas Wells to corridor branch to ward, branch pipe layout in the ceiling of the corridor. The introduction of the ward tube layer by the ward ceiling corridors lead on branch pipe, before entering the room to treatment with part of the pipe with PVC trough buckle, rise to protect piping and aesthetic effect. Pipe should be added when they cross the floor or wall casing, casing diameter than sophomore pipe diameter specifications. In the casing section part cannot weld and connector. Reach floor with head of road, in the shortest design to carry oxygen to all room, operating room, etc., and oxygen in the form of a variety of oxygen for patients. Oxygen pipeline grounding resistance less than 100 ohms.

(4), terminal device, terminal device installed on the wall of the room a side, the distance from the ground 1.3-1.5 m, along the wall of the head of a bed long arrangement. Mainly by the new type of oxygen with electrostatic pensu (), oxygen belt repair valve, plug valve, etc.

The new equipment of beautiful and practical, high security zone: the new oxygen with surface adopt the United States dupont paint spraying or electrophoresis process, has the colour and lustre is uniform, high strength, corrosion resistance, anti-aging, do not fade, strong adhesion, color variety, etc. Surface color can be selected according to user requirements, the company recommended color draw lessons from the foreign medical products style, beautiful and generous.

Plug valve (2) the oxygen, oxygen attract plug valve is sealed tight, flexible plug, long service life, the characteristics of beautiful shape, various performance is higher than the domestic similar products. When using just insert with quick connector of wetting of bottles or attract bottle to fast on a plug socket, will enter into the wet gas bottle or attract the bottle, and then with a wet bottle or attract bottle on the regulator to adjust to the appropriate flow supply patient use. When to stop using, just press the locking ring on quick socket, quick connectors can pop up gently, is automatically cut off the gas and oxygen to stop. Quickly the socket with medical silicone gasket seal, oxidation resistance, prevent ageing, long service life, nontoxic, etc.

Pan-asia will provide you with:

First step: the project plan by the special program, combined with the actual situation of hospital, to assist the hospital address and choose good construction according to the regulations by the designed facilities scheme to the environmental protection departments to conduct an environmental assessment at the same time to health centers for disease control and prevention, assessment for examination and approval by;

Step 2: after approval again by professional construction personnel according to the rules in the construction work on site.

Step 3: install on the pan-asian tailor-made products for you.

Step 4: cooperate with hospital through third-party supervision departments after the acceptance of delivery acceptance.

Step 5: you will enjoy the pan-asian provides you with a lifetime of service.